Benelli TNT 899 vs Brough Superior Pendine Sand Racer

Compare Specifications of Benelli TNT 899 and Brough Superior Pendine Sand Racer

Selected Bikes

Benelli TNT 899
Benelli TNT 899

Brand:

Model:

Brough Superior Pendine Sand Racer
Brough Superior Pendine Sand Racer

Brand:

Model:

Brand:

Model:

Brand:

Model:

Technical Specifications
Fuel Petrol Petrol
Engine Displacement 898.00 cc 997.00 cc
Engine In line 3 cylinders, 4-stroke, liquid cooled, 4 valves per cylinder, DOHC with balancer shaft Watercooled dohc 88° V-twin four-stroke with four valves per cylinder and composite chain / gear cam drive
Engine Starting Electric --
Engine Lubrication Wet sump --
Clutch Wet clutch Multiplate oil-bath clutch with hydraulic operation
Fuel System Electronic injection wth three throttle bodies ø53 mm Electronic fuel injection with Synerject ECU and 2 x 50 mm Synerject throttle bodies, each with a single injector
Ignition Electronic ignition --
Cooling System -- Liquid cooled
Maximum Power 118 PS @ 9500 RPM 102 bhp @ 9600 rpm Euro 4 Homologation
Maximum Torque 88 NM @ 8000 RPM 87 Nm @ 7300 rpm
Load Carrying Capacity 400 kg --
Transmission -- 6 - speed
Gear Shift Pattern 1-N-2-3-4-5-6 --
Drivetrain Primary Drive : 44/79
Final Drive : Chain dirve, ratio 16:41
--
Frame Decomposable, front steel trestle, rear aluminium alloy casting Machined Titanium frame with fabricated Titanium subframe
Gear 6 speeds --
Headlamp LED --
Taillamp LED --
Tyres
Front 120/70-ZR17 (58W) : 120/65-ZR17 (56W) 120/70 - 19’’ on 3.50 inches
Rear 190/50-ZR17 73W (180/55-ZR17 73W; 190/55-ZR17 75W; 200/50-ZR17 75W) 170/60 - 17’’ on 4.5 inches
Wheel / RIM Aluminium alloy
Front Rim : E 17″ x 3.50″ DOT-D
Rear Rim : E 17″ x 6.00″ DOT-D
Machined Aluminium wheels (16 spokes)
Brakes
Front Twin floating wave disk ø320 mm with 4 pison calipers 2 x 320 mm Beringer Stainless Steel discs with 2 x two-piston Beringer radial calipers
Rear -- 1 x 230 mm Beringer Stainless Steel disc with 1 x two-piston Beringer radial caliper
Suspension
Front 50 mm upside-down fork , 120 mm stroke Fior-type cast Aluminium wishbone fork with twin articulated Stainless Steel triangular links, preload and rebound adjustable monoshock with 120 mm travel
Rear Steel tube trestle swingarm, rear dumper with hydraulic adjustment (rebound) and spring preload assembled with progressive link , 120 mm stroke Machined Aluminium swingarm pivoting in engine crankcases, with preload and rebound adjustable monoshock
Colors Available
Colors -- --


Physical Specs
Length -- 2234 mm
Width 790 mm 820 mm
Height -- 1290.5 mm
Weight 215 kg 186 kg
Kerb Weight 205 --
Handlebar Width -- 945.5
Wheelbase 1443 mm 1540 mm
Ground Clearance 135 mm --
Fuel Tank Capacity 16 litres --
Overview
Features -- --
Additional Details EXHAUST SYSTEM : With catalytic converter and oxygen sensor
CERTIFICATION : Euro 3
HEAD ANGLE / TRAIL : 24.8° with 108 mm trail via 38 mm fork offset

Which one do you think is better? And why?
Name :

Comment :

37