Frame |
Dyad Pro High Modulus Carbon Fiber, 130mm travel 3VO suspension, Enduro® Max sealed bearing pivots, 1.5 - 1 1/8” tapered head tube, 12x148mm thru-axle, Internal dropper post routing, Custom Jamis upper chainguide, MRP SXg lower chainguide,Fox DHX2 Factory Series coil shock w/2-position compression switch, SLS 450lb Spring, high/low speed compression, high/low speed rebound, 10mm hardware, replaceable derailleur hanger |
True Temper double-butted CroMo, custom tubing configurations, Shinola custom laser cut dropouts, rack and fender eyelets |
|
|
Stem |
Race Face Turbine R, 50mm extension, 35mm clamp diameter |
Black alloy, 1 1/8", +/7º rise |
|
|
Handle Bar |
-- |
Black alloy, 40º bend, 55 mm rise, 580 mm width, 25.4 mm clamp |
|
|
Fork |
Fox Factory 36 Float 29" w/ 3-position adjust compression & lock-out,15x110mm axle, air spring compression, rebound adjust, tapered alloy steerer, 140mm travel |
Double-butted CroMo, Shinola custom cast fork crown, rack and fender eyelets |
|
|
Seatpost |
Fox Transfer Dropper, 1x remote |
Black alloy, 27.2 mm x 350 mm |
|
|
Grip |
Jamis Lock-On |
Cork, 127 mm |
|
|
Crankset |
Truvativ Descendant Carbon, 32T |
Black alloy, 38T ring |
|
|
Chain |
SRAM XX1 Eagle, 12-speed |
1/2" x 1/8" |
|
|
Shifters |
Shift levers : SRAM XX1 Eagle, 1x12-speed |
-- |
|
|
Saddle |
WTB Volt |
Shinola black leather, silver rails and rivets |
|
|
Headset |
FSA Orbit IS Integrated, 8mm cone spacer |
Black alloy, 1 1/8" |
|
|
Derailleur Rear |
SRAM XX1 Eagle, 12-speed |
-- |
|
|
Hub Front |
-- |
Black alloy, 32º, bolt-on |
|
|
Hub Rear |
-- |
Black alloy, 32º, bolt-on, one-speed freewheel |
|
|
Spoke |
-- |
DT Swiss Champion, 14g, stainless |
|
|
Cassette |
SRAM XG1299, 12-speed, 10-50T |
-- |
|
|
Bottom Bracket |
SRAM DUB |
Square taper, 113 mm |
|
|
Stand |
-- |
kickstand |
|
|
Front |
Vittoria Martello 29 x 2.35", TNT tubeless |
Continental Contact Reflex, 700 x 32C, w/reflective strip |
|
|
Rear |
Vittoria Martello 29 x 2.35", TNT tubeless |
Continental Contact Reflex, 700 x 32C, w/reflective strip |
|
|
Wheel / RIM |
Stans Arch CB7 Carbon 29" tubeless wheels, 15x110mm axle front and 12x148mm rear NEO hubs, Sapim Race spokes |
Sun CR-18, 32º, one-eyelet, Presta valve, black with machined side-wall |
|
|