Frame |
-- |
True Temper double-butted CroMo, custom tubing configurations, Shinola custom laser cut dropouts, rack and fender eyelets |
|
|
Stem |
-- |
Black alloy, 1 1/8", +/7º rise |
|
|
Handle Bar |
-- |
Black alloy, 40º bend, 55 mm rise, 580 mm width, 25.4 mm clamp |
|
|
Fork |
Öhlins RXF 38 M.2 29, 170mm, TTX18 Twin Tube cartridge, tapered tube, 15x110mm Boost axle, 44mm offset. Settings: High compression with "climb" mode, low compression, rebound, air preload, "ramp" camera |
Double-butted CroMo, Shinola custom cast fork crown, rack and fender eyelets |
|
|
Seatpost |
-- |
Black alloy, 27.2 mm x 350 mm |
|
|
Grip |
-- |
Cork, 127 mm |
|
|
Crankset |
-- |
Black alloy, 38T ring |
|
|
Chain |
SRAM SX Eagle, 12v, Powerlock |
1/2" x 1/8" |
|
|
Saddle |
SDG BEL-AIR 3.0, LPU foam, steel rails |
Shinola black leather, silver rails and rivets |
|
|
Headset |
-- |
Black alloy, 1 1/8" |
|
|
Derailleur Rear |
SRAM NX Eagle, Type 3 needle bearing clutch, cage lock, 1x12v long cage, X-ACTUATION 1: 1 |
-- |
|
|
Hub Front |
Mavic, SuperBoost 12x157mm, ID360 ratchet system, IS 6 bolt |
Black alloy, 32º, bolt-on |
|
|
Hub Rear |
Mavic, Boost 15x110mm, IS 6 bolts |
Black alloy, 32º, bolt-on, one-speed freewheel |
|
|
Spoke |
32T, CNC machined alloy, X-SYNC 2 |
DT Swiss Champion, 14g, stainless |
|
|
Bottom Bracket |
SRAM DUB BSA, sealed bearings, 73mm |
Square taper, 113 mm |
|
|
Stand |
-- |
kickstand |
|
|
Front |
Maxxis Assegai 29x2.5WT, tubeless ready, 3C MAXX GRIP compound, DH shell, 60x2TPI, folding bead |
Continental Contact Reflex, 700 x 32C, w/reflective strip |
|
|
Rear |
Maxxis Dissector 29x2.4WT, tubeless ready, 3C MAXX GRIP compound, DH shell, 60x2TPI, folding bead |
Continental Contact Reflex, 700 x 32C, w/reflective strip |
|
|
Wheel / RIM |
-- |
Sun CR-18, 32º, one-eyelet, Presta valve, black with machined side-wall |
|
|
Features |
-- |
-- |
|
|
Additional Details |
Pinions : SRAM XG-1230, 11-50T, 12v
Derailleur hanger : Mondraker M068
Controls - change buttons : SRAM Trigger X01 Eagle, 12v, X-ACTUATION 1: 1
Shank :ONOFF Internally wired pin, diameter 31.6mm, size S: 337x100mm, M: 387x125mm, L: 425x150mm, XL: 465x170mm
Power : ONOFF Krypton FG 30mm, CNC, for 31.8mm handlebars
Shock absorber : Öhlins TTX 22M Coil 205X65mm. Settings: high compression lever with "climb" mode (semi locked), low compression, rebound, air preload. Trunnion top anchor, 22.2x10mm bottom bushings.
Connecting rods : Truvativ Descendant 7K Eagle, SuperBoost, DUB axle, Direct Mount chainring, S / M: 170mm, L / XL: 175mm
Radios : DT Champion, straight rise
Cuffs : ONOFF Diamond, 1 lock-on, 135mm
Damper adjustment : Compression C20, Rebound R35 |
Bell, fenders and chain guard |
|
|