Fuel |
-- |
Electric |
|
|
Battery |
-- |
Shimano E8020, 500Wh integrated |
|
|
Frame |
Double-Butted 6061 Aluminum Alloy |
Felt All Mountain, 150 mm travel, Shimano e-Bike specific, double-butted 6061 aluminum, fully integrated down tube, Control Taper integrated head tube, post disc mount, replaceable derailleur hanger, 12 x 148 mm Syntace style thru axle |
|
|
Stem |
Aventon Push Forged Alloy, 4-bolt, +/- 7° |
Devox, ±7° rise, Ø31.8 mm with Cr-Mo bolts, 35 mm |
|
|
Handle Bar |
31.8 mm*40cm Push Drop Bars |
Devox E-MTB 6061 butted riser, Ø31.8 mm, 25 mm rise, 9° sweep, 780 mm wide, custom internal wire routing |
|
|
Fork |
Alloy Steerer/Carbon Blades |
Rock Shox Yari RC Solo Air, 150 mm travel, 15 x 110 mm Boost, E-Bike specific |
|
|
Seatpost |
Aventon Aero Carbon Seatpost
Seat Clamp :Single Bolt Style |
KS LEV Integra dropper with South Paw, Ø30.9 mm, SM: 100 mm travel, MD: 125 mm travel, LG/XL: 150 mm travel |
|
|
Grip |
-- |
Devox Pauley Grip |
|
|
Crankset |
-- |
Shimano E8050, 34T, SM/MD/LG: 170 mm, XL: 175 mm |
|
|
Pedals |
Alloy Road Pedals |
-- |
|
|
Chain |
1/2" x 1/8" |
KMC X11-E, 11-speed |
|
|
Shifters |
-- |
Shimano SLX M7000, 1 x 11 |
|
|
Saddle |
Aventon Aero Race Saddle |
WTB Volt Race, Cr-Mo rails |
|
|
Headset |
28.6*41.8*30 mm Sealed Bearing |
FSA sealed cartridge bearings, semi-integrated, No.57, 1.125 - 1.5" |
|
|
Derailleur Rear |
-- |
Shimano XT, 11-speed, Shadow Plus, long cage |
|
|
Hub Front |
Flip-Flop Sealed Bearing |
Shimano Deore, 12 x 148 mm Boost thru axle, Center lock, 32H |
|
|
Hub Rear |
-- |
Shimano Deore, 15 x 110 mm Boost thru axle, Center lock, 32H |
|
|
Spoke |
14G Stainless steel w/ brass nipples |
2.0 mm butted stainless steel |
|
|
Cassette |
-- |
Shimano SLX, 11-speed, 11-46T |
|
|
Chainrings |
Aventon Push 48T*165mm 144mm BCD |
-- |
|
|
Front |
Kenda Kriterium 25c. Max width on Mataro Frame & Fork is 25c. |
Maxxis Minion DHF front, Maxxis High Roller 2 rear, 3C/EXO, tubeless ready, 27.5 x 2.8" |
|
|
Rear |
Kenda Kriterium 25c. Max width on Mataro Frame & Fork is 25c. |
Maxxis Minion DHF front, Maxxis High Roller 2 rear, 3C/EXO, tubeless ready, 27.5 x 2.8" |
|
|
Wheel / RIM |
Rims : Double Wall Aluminum, 30mm Deep V Push Wheels |
WTB Scraper i35, tubeless compatible, 35 mm inner width |
|
|
Tube |
Kenda 700 x 28c Presta Valve |
-- |
|
|