| Fuel |
Electric |
Electric |
|
|
| Motor |
Rear Hub, Geared, 500W |
750 Watts / Bafang
1,300 Watts peak power @ 25A
80 Nm Peak torque
5:1 Geared hub motor for higher torque output
290 RPM Super high speed winding
Low-drag freewheeling clutch
Shimano cassette standard |
|
|
| Load Carrying Capacity |
312 lbs(141.5 Kg) |
275 lbs (120 kg) total payload rating |
|
|
| Battery |
614.4Wh (48V) |
52V / 19.2 Ah Hyper Extended Range Battery
52 Volts system (14S6P Configuration)
995 Wh Capacity
LG Chem (Korea)
45 Amp high rate BMS
84 Cells / 18650 Type
Custom designed wide format inclosure
Lockable and removable from the bike
On-bike and off-bike charging capable
8 Amp charge |
|
|
| Charger |
2A, AC 120V - 240V |
52V / 2 Amps Standard charger (included)
2 Amps max charge rate
3 Pin XLR Connector
UL Certified
On-bike and off-bike charging
52V / 4 Amps Turbo charger (optional)
4 Amps max charge rate
3 Pin XLR Connector
UL Certified
On-bike and off-bike charging |
|
|
| Controller |
-- |
9 Transistor / 25 Amp Peak
Sine wave FOC
Customized tuning algorithm
Thermally managed
52V LED light output
Overboost function
Fully potted resistant construction
Cruise control function
Walk function
XT60 connectors
Firmware upgradable |
|
|
| Display |
Color LCD |
LCD Matrix Display
Matrix Display with 120 x 64 Pixels
Customized interface with 3-button layout
7 Levels assist: 0, ECO, 1, 2, 3, SPORT (28 mph), RACE (Unlimited)
Basic and Advanced display modes
Water resistant IP65
Backlit illuminated display
5 Pin quick-connect cable with brass lock-ring
Push button start up |
|
|
| Frame |
Aluminum Alloy, Folding |
Sizes: Seat Tube Measurement
M: 16.5” (41.9 cm)
L: 18.0” (45.7 cm)
XL: 20.0” (50.8 cm)
6061 Aluminum Heat Treated Frame
Integrated & removable down-tube battery
Custom Designed Hidden cable channel system
CNC battery compartment
Integrated motor controller heat sink
Hydroformed top tube
Dual water bottle cage mount
Rear pannier rack mount
Fender stay mounts
Dual kickstand mounts |
|
|
| Stem |
Foldable |
Promax Stem 680 mm width | 31.8 mm |
|
|
| Handle Bar |
640mm Wide, 25.4mm Clamp |
Promax Low Rise 680 mm Handlebar
Promax Stem DA-247 | 80 mm +7 | DEG rise | 31.8 mm clamp |
|
|
| Fork |
Steel |
Suntour NCX Suspension Fork
Hydraulic lockout
Adjustable spring rate
1-1/8 Threadless
Fender stay mounts
Standard quick release |
|
|
| Seats |
-- |
Selle Royal | Lookin | Gel |
|
|
| Seatpost |
27.2mm x 400mm, Alloy |
Promax 31.6 mm seat post diameter
Seat Post Clamp: Promax quick release seat post clamp |
|
|
| Grip |
Ergonomic, Rubber |
Velo | Ergonomic lock-on grips | Clamp Diameter 22.2mm |
|
|
| Pedals |
-- |
Platform Pedals
Wellgo B249DU
Polymer bearing |
|
|
| Pedal Assist System |
3 Levels + Auto Function |
-- |
|
|
| Chain |
KMC 8spd |
KMC K99 BR
Rust Buster
9 Speed Compatible
128 links |
|
|
| Shifters |
Electric, Auto Function, 8-speed |
-- |
|
|
| Saddle |
Comfort Padded |
-- |
|
|
| Headset |
1 1/8" Threadless |
-- |
|
|
| Derailleur Rear |
Microshift 8-speed |
Shimano Altus 9 Speed
11-32T | Cassette | Trigger shifter |
|
|
| Hub Rear |
13-32T |
-- |
|
|
| Spoke |
-- |
Front: 13G Black | 232 mm | 275.5 mm
Rear: 13G Heavy duty | SAPIM | Stainless | Black | 232 mm |
|
|
| Chainrings |
-- |
Pro Wheel 52T
Aluminum CNC | 170 mm
Outside chain guide
Inside chain catcher to eliminate chain drops |
|
|
| Bottom Bracket |
-- |
VP-BC73
Axle Length: 126
BB Length: 68 mm
Taper: English Square |
|
|
| Headlamp |
-- |
Front LED Light (included)
1,050 Lum
CREE 7 Watt
10-60V input
Aluminum body design
Powered by main battery
Waterproof design IP69
Display controlled on/off function |
|
|
| Taillamp |
-- |
Rear LED Light (included)
Star Union Rear LED Tailight
Blinking and steady mode
Includes reflector
Batteries included |
|
|
| Front |
20” x 2.4”, Puncture Resistant, Reflective Strip |
Schwalbe Marathon Plus
700C x 45C (45-622) | 28” x 1.75”
Achieves the highest level of puncture protection available
E-Bike Ready (ECE-R75) : Approved and tested for E-bikes up to 50 km/h
GreenGuard layer is 5 mm thick
"Anti-Aging" sidewall
Reflective sidewall strip for better visibility
40-70 PSI Recommended tire pressure
Bead: Wire (non-folding)
Tube: 700c x 45 | Schrader Valve |
|
|
| Rear |
20” x 2.4”, Puncture Resistant, Reflective Strip |
Schwalbe Marathon Plus
700C x 45C (45-622) | 28” x 1.75”
Achieves the highest level of puncture protection available
E-Bike Ready (ECE-R75) : Approved and tested for E-bikes up to 50 km/h
GreenGuard layer is 5 mm thick
"Anti-Aging" sidewall
Reflective sidewall strip for better visibility
40-70 PSI Recommended tire pressure
Bead: Wire (non-folding)
Tube: 700c x 45 | Schrader Valve |
|
|
| Wheel / RIM |
-- |
Double walled aluminum alloy rim
36 Hole 19mm inner wheel width
12G / 13G brass grommets
High pressure rim strip
Flat Black |
|
|
| About |
The Blix Vika X is a folding bicycle that combines convenience with a 500W rear hub motor. It h Read More |
-- |
|
|
| Features |
- USB Charge Port
Smarter light
Rear light safety
 |
-- |
|
|
| Additional Details |
Folding size - 36"21"29"
Torque sensor
Front Light: Integrated, Low-beam 70 lux, High-beam 120 lux
Rear Light: Integrated, Turn Signal, Break Light
Fenders Included, Plastic, PVC, Black
Rear Rack Included, MIK compatible |
Throttle Control
Thumb Throttle (included)
Right or left side mountable
Throttle set to 20 mph per e-bike regulations
Pedal Sensors
Advanced Torque and Cadence Dual Sensor
Torque sensor (included)
Rear Drop-out frame-mounted strain gauge
1,000 samples per second
Cadence sensor (included)
104 poles per crank revolution (maximum)
Digitally filtered output |
|
|