BMW 2024 R 18 vs CAKE Kalk AND

Compare Specifications of BMW 2024 R 18 and CAKE Kalk AND

Selected Bikes

BMW 2024 R 18
BMW 2024 R 18

Brand:

Model:

CAKE Kalk AND
CAKE Kalk AND

Brand:

Model:

Brand:

Model:

Brand:

Model:

Technical Specifications
Fuel Petrol Petrol
Motor -- 10 kW motor
Range -- Mixed city riding (WMTC-II): 86 km / 53 miles
High speed riding (@70 km/h / 44 mph): 35 km / 22 miles
Charging Time -- 0-100% takes 2,5 h to charge in a standard outlet
Engine Air/oil cooled two-cylinder four-stroke boxer engine with two chain-driven camshafts above the drive shaft. --
Clutch Single-disc dry clutch --
Fuel System Electronic intake pipe fuel injection, BMS-K+ electronic engine management with overrun cut-off and twin-spark ignition. --
Maximum Power 91 hp at 4,750 rpm --
Maximum Torque 157 Nm at 3,000 rpm 42 Nm on shaft / 252 Nm on wheel
Load Carrying Capacity 215 Kg --
Transmission 6-speed transmission --
Top Speed 111 kmph 90 kmph
Battery 12 V / 26 Ah 18650 lithium ion cells 51.8 Volt 50 Ah 2.6 kWh
Display -- Speedometer, trip meter and odometer Battery status and power usage
Frame Double-cradle steel frame 6061 aluminium, extruded, forged, machined and painted
Stem -- Aerospace grade 7075 aluminium
Handle Bar -- Aerospace grade 7050 aluminium, 800 mm wide, 20 mm rise, 31.8 mm
Chain -- 420 O-ring
Headset -- SKF Stainless steel conical bearings
Sprocket -- Front sprocket: 12 teeth, rubber infused
Rear sprocket: 72 teeth
Headlamp -- LED
Taillamp -- LED
Tyres
Front 120/70 R 19 --
Rear 180/65 B16 --
Wheel / RIM Spoke wheel Enlarged 25 mm front axle Aluminium 6061 forged and CNC machined hubs 19×1.85” 7116-T6 aluminium motorcycle rims 19×3.00” dual sport motorcycle tires
Brakes
Front Twin disc brake, diameter 300 mm, four-piston fixed calipers Motorcycle standard, four pistons calipers and 220 mm/3.2 mm stainless steel discs Hand lever
Rear Single disc brake, diameter 300 mm, four-piston fixed caliper --
ABS BMW Motorrad Integral ABS (partially integral) --
Suspension
Front Telescopic fork The upside down fork is air/oil sprung and features 38mm stanchion tubes for extra rigidity and strength, with 204 mm travel, specially developed by Öhlins. Adjustable for high-speed compression, low-speed compression and low-speed rebound. The forks are equipped with Öhlins advanced 3 stage air springs with individual setup for ride heights and bottoming resistance.
Rear Steel swingarm with central shock strut 205 mm. Öhlins TTX22 with CAKE internals and specific spring. Designed with linkage for best performance.
Colors Available
Colors -- --


Physical Specs
Length 2440 mm --
Width 965 mm --
Height 1125 mm --
Weight 560 kg --
Kerb Weight -- 62
Seat Height 690 910
Wheelbase 1729 mm 1310 mm
Ground Clearance -- 300 mm
Fuel Tank Capacity 16 litres --
Overview
Features - ASC (Automatic Stability Control)
- Full LED headlight
- Keyless Ride
- LED rear and brake light included in rear indicators
- Speedometer with multifunction display (on-board computer)
- 3 riding modes (Rock, Roll, Rain)
3 riding modes:
- Explore: The ultimate mode during exploration. Limited speed to 45 km/h and 3-4h+ battery range
- Excite: Enduro or active trail riding. 1-2 h riding time
- Excel: Track and race mode, maximal torque and speed, riding time up to 1h

3 brake modes:
- Free wheel
- 2-stroke like
- 4-stroke like, maximum regeneration of electricity to battery
Additional Details -- Weight : Dry 62 kg + battery 17 kg
Head angle / Fork angle : 65 degrees
Fenders and bodywork : All fenders and bodywork are made of painted polycarbonate
L3e-A1E License requirement: A1

Which one do you think is better? And why?
Name :

Comment :

6000